2
1. Lay the Marcy Trampoline on the floor, in it’s still folded position which looks like an
oval shape as shown in Image 1 (springs are just for illustrative purpose). Push out the
ends according to the arrows on the picture in Image 1, and the trampoline expands into a
semi circle as shown in Image 2. Now ensure the larger outer hinges are touching the floor
as in Image 3.
2. Firmly grasp both halves of the frame at the midpoint of
each half circle according to the arrows and pull out.
Note: Frame will snap open so please read step
no.3 carefully. Please keep all fingers away from
hinge when opening and closing.
3. Using steady pressure, with hands open and fingers
extended, use palm of hands to push top side of frame
up, over and down to open position.
4. With the Marcy Trampoline now open and still upside
down, thread the 6 legs to a perpendicular position (up and
over its holding platform pin).
Note: Be careful not to catch the cover fabric.
5. Turn the Marcy Trampoline right side up, and attach the fabric of the skirt
evenly around the jumping mat so that the skirt covers all the straps in an
even manner. Please note the holes in the fabric skirt should be
underneath the straps.
6. Proceed to page 5 for stabilizing bar assembly instructions.
OPENING THE TRAMPOLINE
Image 3
To Next Page