of the smart watch.
Restore factory settings: Resets the smart watch to
factory settings (click "√" to confirm or "×" to exit). This
function will erase all the data saved on the smart watch.
Find phone
The paired phone will ring so you can find it. The phone and
the watch must be linked and within the Bluetooth range.
Meteorology
Displays the day's ultraviolet (UV), atmospheric pressure,
and altitude conditions. The phone and the watch must be
linked so the watch can receive the meteorology and
location info from the phone. When the app is downloaded,
the local data may be updated after 00:00 that day. Make
sure that the geographic location is enable for the app.
Breathing
There are three modes of breathing monitoring: slow,
moderate, and fast. The time of the measurement can be
set to 1, 2 or 3 minutes.