Need help?Do you have a question about the MARIAN SERAPH 8 and is the answer not in the manual?
Covers installation process, scope of supply, and system requirements.
Explains the steps for installing hardware and software for the SERAPH 8.
Details how to update drivers and firmware, including important notes.
Describes the physical connections and ports of the SERAPH 8.
Explains operating the mixer and routing functions via mouse and keyboard.
Provides detailed explanations of the mixer's general functions and channel strips.
Explains the routing system, including DAW In and Output sections.
Explains the clock status panel for monitoring samplerates and clock sources.
Details general settings like operation mode and sample rate configuration.
Covers clock synchronization modes (master, slave, SyncBus).
Explains adjusting buffer size to control latency.
Details configuring ASIO devices, aliases, and buffer settings.
Provides warranty information and contact details for support.
Discusses clock settings management when using ASIO.
Explains samplerate behavior, especially on Windows Vista.
Addresses simultaneous use of different samplerates via ASIO.
Discusses simultaneous playback from multiple programs on one device.
To Next Page
General