Need help?Do you have a question about the MarinAire MSBA Series and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| HSPF Rating | Up to 10 |
| Dimensions (Outdoor Unit) | Varies by model |
| Weight (Outdoor Unit) | Varies by model |
| Type | Split System |
| BTU | 9000 - 36000 |
| Cooling Capacity | 9000 - 36000 BTU/h |
| Heating Capacity | 9000 - 36000 BTU/h |
| Refrigerant | R410A |
Details on rotatable blower, pressure gauges, and charging port.
Electrical schematic for 110-120V/60Hz power supply.
Electrical schematic for 230V/60Hz power supply.
Electrical schematic for the MSBA6C2 model.
Electrical schematic for MSBA20 and MSBA24 models.
Recommendations for optimal placement and accessibility of the unit.
Details on voltage, power supply, and wiring for the unit.
Explanation of buttons and display indicators on the control panel.
Troubleshooting for E0 error related to the humidity sensor.
Troubleshooting for E1 error indicating potential coil freezing.
Troubleshooting for E2 error related to the indoor temperature sensor.
Troubleshooting for E3 error related to the coil temperature sensor.
Troubleshooting for E4 error indicating high pressure conditions.
Troubleshooting for E5 error indicating low pressure conditions.
Troubleshooting for E7 error related to water flow or level.
Troubleshooting for E9 error indicating overheating of the evaporator coil.
Troubleshooting for EA error related to communication issues.
To Next Page