Marine Power 4.3 VORTEC MPI User Manual

7www.MarinePowerUSA.com
3. Engine Identication
Every Marine Power Engine is equipped with an Engine
Identification Tag, also known as a Serial Number Tag.
This tag contains information (model number and serial
number) that will be required before any warranty work
(if necessary) can be done.
Airpac:
Engines configured for airboat applications. These
engines use closed cooling systems with automotive
style radiators. Their exhaust manifolds are dry and
usually supplied by the boat builder.
Enpac:
Engines configured for stern drive (I/O) applications.
Cooling water supply differs depending on the stern
drive model mated to. See Section 12: Installation
Instructions.
Jetpac:
Engines configured for inboard jet drive applications.
Cooling water normally supplied by jet drive. Routing of
inlet out outlet cooling water lines will affect winteriza-
tion. See Section 9: Winterization procedures.
Towpac:
Engines configured for watersport tow boat appli-
cations. Engines may be configured for conventional
inboard or v-drive application. In many of these applica-
tions throttle and shift is highly integrated with the boat
instrumentation
Sportpac:
Engines configured for traditional inboard vessels.
Many of these applications are twin installations.

Marine Power 4.3 VORTEC MPI Specifications

General

Brand	Marine Power
Model	4.3 VORTEC MPI
Category	Engine
Language	English