23
4. Operations with the Transformer
4.3 Other Information
All Märklin products as delivered conform to the relevant regulations on preventing
interference with radio and television reception. Worn out materials and/or faulty main-
tenance of the product as well as operation not in accordance with the instructions
can lead to increased interference with radio and television reception. An information
sheet on this subject is available on request.
With conventional operation a feeder connection with interference suppression
should be used in each power circuit.
M Track: 5131
K Track: 2292
C Track: 74046 (additional connections with 74042)
The wiring diagrams that apply to the different turnouts or signals can be found in the
instructions the come with these products.
Checking the Polarity
When two or more train control transformers for different track circuits are used on a
layout, it may happen that different polarities for the transformers may cause a strong
spark on the pickup shoe of a locomotive passing over the separation point
between two track circuits. In this instance the plug on the power cord for one of the
transformers must be removed from its outlet, turned 180° and plugged back into the
outlet.
To Next Page
Loading...
Need help?
General
