Need help?Do you have a question about the marklin 74470 and is the answer not in the manual?
Insert the swivel plate and attach the cam to the assembly.
Attach the light diffuser onto the turnout mechanism.
Mount the lantern housing onto the turnout.
Place the LED circuit board into its designated frame.
Insert the complete lighting unit into the turnout and secure it with screws.
Details on lighting for two turnouts, right or left, with manual or electric operation.
Illustrations and part numbers for left and right turnout lighting kits.
Guidance on electrical connections suitable for both conventional and digital systems.
Details of suitable plugs and sockets for connections, identified by part number 71400.
Information confirming that the LED lighting system is maintenance-free.
Insert the swivel plate and attach the cam to the assembly.
Attach the light diffuser onto the turnout mechanism.
Mount the lantern housing onto the turnout.
Place the LED circuit board into its designated frame.
Insert the complete lighting unit into the turnout and secure it with screws.
Details on lighting for two turnouts, right or left, with manual or electric operation.
Illustrations and part numbers for left and right turnout lighting kits.
Guidance on electrical connections suitable for both conventional and digital systems.
Details of suitable plugs and sockets for connections, identified by part number 71400.
Information confirming that the LED lighting system is maintenance-free.
To Next Page
General
