18
Status lamps
• Switch on: Bluetooth priority: the blue status lamp ashes rapidly during pairing and ashes
slowly when the pairing is nished.
• SD card mode: When the SD card is inserted the blue status lamp ashes slowly.
• Charging: The red status lamp goes on during charging and goes o when the battery is fully charged.
NFC function
1. Activate the phone’s NFC function.
2. Touch the speaker with the phone.
3. A question for Bluetooth pairing is shown on phone. Select the pairing option in the menu.
4. The units are paired and music from the phone is heard in the speakers. The buttons on the
speaker can be used to control the music.
Bluetooth pairing
NOTE: The default code for the Bluetooth speaker is 0000.
1. Press the power switch for 3 seconds to switch on. You receive a voice reminder that the
speaker is ready to be paired and the blue status lamp starts ashing.
2. Activate the Bluetooth function on your Bluetooth unit, search for units and select M6 when it
is shown on the list and conrm.
Successful pairing and playback
When the pairing is ready you will hear the voice signal "Bluetooth speaker pairing successfull" and
the blue status lamp goes on. You can now play music les from your phone or tablet etc.
Handsfree
1. For incoming calls when the speaker is connected via Bluetooth to a phone the music stops
and you hear the phone’s ringtone.
2. Tap the button to answer and end the call, press and hold to dismiss the call.
3. In Bluetooth mode, press and hold to dismiss call, tap to end call.
Playback from MicroSD card
1. Press the power switch until you hear the voice signal "Waiting for connection of Bluetooth devices".
2. Switch to SD card mode by tapping the switch mode button. When you hear the voice signal
"Reader music mode" you can play music from the SD card.
To Next Page
Loading...