Mars Low Profile Series 2-CSI-Spec Revised 2/3/2021
MARS AIR SYSTEMS, LLC
23 34 33 – 2
L. Section 26 05 00 – Equipment Wiring: Connections to building power distribution.
1.3 REFERENCES
A. ASTM A240 / A240M -10 – Standard Specification for Chromium and Chromium and
Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for
General Applications.
B. ASTM A591 / A591M -98 – Standard Specification for Steel Sheet, Electrolytic Zinc-
Coated, for Light Coating Weight (Mass) Application (Withdrawn in 2005, replaced by
A879/A879M).
C. ASTM A879 / A879M -06 – Standard Specification for Steel Sheet, Zinc Coated by the
Electrolytic Process for Application Requiring Designation of the Coating Mass on Each
Surface.
D. ASTM A653 / A653M -09a – Standard Specification for Steel Sheet, Zinc Coated
(Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
E. AHRI 410-2001 – Standard for Forced-Circulation Air-cooling and Air-Heating Coils.
F. NSF/ANSI 37 – Air Curtains for entranceways in food and food service establishments –
ETL Sanitation.
G. CRN – Canadian Registration Number Coil.
H. ANSI Z223-NFPA 54 – National Fuel Gas Code/
I. UL 507 – UL Standard for Safety Electric Fans – Intertek Testing Services Listed for US
and Canada
J. UL 2021 – UL Standard for Fixed and Location-Dedicated Electric Room Heaters –
Listed for US and Canada.
K. NEC – National Electric Code.
1.4 SUBMITTALS
A. Submit under provisions of Section 01 33 00.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Shop Drawings: Include plans, elevations, sections, and details, indicating dimensions,
tolerances, materials, fasteners, hardware, finish, piping, electrical wiring diagrams,
options, and accessories.
To Next Page
Loading...
Need help?
General
