Marshall Amplification EMBERTON II - Page 14

002 . ENGLISH
0
©
0
©
001. Push and hold the control knob until the speaker turns on.
002. Push and hold the BluetoothG'J button until the LED turns to a slow red pulse .
003. Select EMBERTON II from your audio device 's Bluetooth list.
BLUETOOTH BUTTON
Push and hold the Bluetooth button until the
LED turns to a slow red pulse to start
pairing mode.
CONTROL KNOB
I. Push and hold to turn on/off
II. Push once to play/pause
Ill. Push right/left to skip forward / back
IV. Hold right/left to fast forward/rewind
V. Hold upwards/downwards to adjust
the volume
BATTERY INDICATOR
The 1 O segment battery indicator shows the
battery charge.
USB-C POWER INPUT
Charge the speaker by plugging it into a USB
power source.
© STACKMODE
Connect two or more Emberton II speakers in
a Stack session for a bigger sound.
MAIN SPEAKER
Triple press the Bluetooth button to start or
end a Stack session.
ADDITIONAL SPEAKER
Double press the Bluetooth button on any
speaker you want to add to or remove from
the session.
Download the Marshall Bluetooth app to get the most
out of your speaker. The full user manual is available in
the app or at marshallheadphones.com