Marshall Amplification KILBURN - General Description of Controls

PLUGGING IN THE CAMDEN LOUDSPEAKER
001. INSERT THE POWER CORD INTO THE POWER JACK ON THE BACK OF
THE LOUDSPEAKER.
002. CONNECT THE CORRECT POWER CORD TO THE WALL SOCKET.
010.
NOTE: A POWER CORD WITH AN
APPROPRIATE PLUG FOR YOUR
REGION IS SUPPLIED
CAUTION: ALWAYS UNPLUG
THE POWER CORD FROM
THE WALL SOCKET BEFORE
DISCONNECTING IT FROM
THE LOADSPEAKER.
002.
001.
002.001.
DRAFT