Marshall Amplification KILBURN - Replacing the Internal Battery

SOUND SPECIFICATION
• ACTIVE STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM
• TONE CONTROLS:
• BASS: 180HZ,
+6DB TO -12DB
•
TREBLE: 3KHZ,
+6DB TO -12DB
• CLASS D AMPLIFIER: 2X5W+1X15W
• WOOFER: 1X 4”
• DOME TWEETER: 2X 3/4”, FERROFLUID COOLED
• MAX SPL: 100DB SPL @ 1M (GROUND PLANE 300HZ,
1%THD)
•
FREQUENCY RANGE: 62-20.000HZ
•
CROSSOVER FREQUENCY: 4200HZ
CONNECTIVITY
•
B
LUETOOTH: STANDARD V4.0
• INPUT - 3.5MM: 1X
TECHNIC
AL INFORMATION
•
MAINS INPUT VOLTAGE: 100-240VAC/70W
•
ABSOLUTE MIN/MAX: 90-264V
AC
•
MAINS FREQUENCY
: 50-60HZ
•
AUDIO MAX PEAK POWER CONSUMPTION: 70W
• TWO ST
ANDBY MODES: POWERSAVER MODE (0,40W)
AND STANDARD MODE (3,5W)
• MAX POWER OUTPUT: 30W RMS
•
BATTERY TYPE: 4X 3,7V LI-IO BATTERIES, 2200MAH
•
BA
TTERY PLAYING TIME: UP TO 20H (50% VOLUME)
•
WEIGHT
: 3.00KG
•
SIZE: 242 X 140 X 140MM
NOTE: THE FRONT FRET IS NOT REMOVEABLE. THIS ILLUSTRATION INTENDS TO
SHOW THE INTERNAL SPEAKER LAYOUT. DO NOT ATTEMPT TO REMOVE THE
FRONT FRET FOR RISK OF DAMAGING YOUR ACTIVE LOUDSPEAKER.
TECHNICAL INFORMATION