005
MOTIF II A.N.C. – FULL ONLINE MANUAL
BACK TO INDEX
INSTRUCTIONS
GETTING STARTED
I. Open the charging case.
II. Press and hold the button on the case until the LED turns to a slow blue pulse.
III. Select MOTIF II A.N.C. from your sound device’s Bluetooth list.
IV. Download the Marshall Bluetooth app and follow the in-app instructions
to complete the setup.
CHARGING THE EARBUDS
Put your earbuds back in the case and close the lid to turn them o and begin
charging.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The case is fully charged when the front-facing LED is steady green.
To charge the case using a wireless charger, follow the instructions below.
I. Place the charging case with its back flat against the
wireless charging pad.
II. Make sure that the front LED lights up to indicate that the case
is charging.
III. Once the LED light has turned steady green the case is fully charged.
NOISE CONTROL
Motif II A.N.C. can be in one of three noise control modes.
• Active Noise Cancelling - blocks out your surroundings and lets you focus
on the music.
• Transparency - allows you to hear your surroundings and hold
conversations without removing your earbuds.
• O – noise control is turned o.
The amount of Active Noise Cancelling and Transparency can be adjusted in
the Marshall Bluetooth app.
ENGLISHENGLISH
To Next Page
Loading...
