007
MOTIF II A.N.C. – FULL ONLINE MANUAL
BACK TO INDEX
INSTRUCTIONS
CLEANING YOUR MOTIF II A.N.C.
Earbuds come in close contact with your skin often and sometimes for long
periods. This will over time cause build-up of dirt and grease that can aect
performance and may cause skin irritation. Clean your earbuds regularly to
keep them fresh and make them last longer.
Unplug any cables before cleaning the case. Make sure everything is
completely dry before using the earbuds, putting the earbuds back in the
case, or plugging in a USB charger.
Remove the silicone ear tips from the earbuds and clean them separately.
Use a disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl
alcohol or 75% ethyl alcohol to gently clean the ear tips, the exterior surfaces
of the earbuds and the case. Avoid getting moisture in any openings or in the
speaker mesh. Carefully clean those areas with a dry and soft brush, or a
cotton swab.
• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the earbuds in any cleaning agents.
PAIRING A NEW DEVICE
Motif II A.N.C. remembers the last 8 paired sound devices. It will auto-connect
to the two most recently used sound devices that are available.
I. Place the earbuds in the case and keep the lid open.
II. Press and hold the button on the case until the LED turns to a
slow blue pulse.
III. Select MOTIF II A.N.C. from your sound device’s Bluetooth list.
Note: Motif II A.N.C. will not change sound source while playing. Pause the
current audio playback before changing sound source.
ENGLISHENGLISH
To Next Page
Loading...
