Q&A
Q: What can you do with CT001 after it has been installed and
network configuration is complete?
A: After connecting the CT001 to the WIFI network, Balcony
Energy Storage will automatically find the link to the device
to read the power of the grid and realize intelligent power
supplementation.
Example: CT001 collects the current load power on line A is
400W; then Balcony Energy Storage will provide 400W output
power.
Q: What is the adjustment time of intelligent power controlling?
A: Usually about 2 minutes. Because the household load has
been changing dynamically, the adjustment time will also
change in a dynamic way.
Q: How to set the automatic mode of
Balcony Energy Storage?
A: Choose the automatic mode in the
discharge setting of the Balcony
Energy Storage APP. The balcony
energy storage will automatically find
the CT001 in the network and read the
load of the home grid to achieve
intelligent and dynamic output.
About the network configuration:Currently, CT001 only supports
2.4G WIFI network.
Discharge mode setting
In adaptive mode, the device will automatically
adapt to the discharge output based on the sensor,
and there may be a difference of 50 watts in the
collector. We apologize for any inconvenience
caused.
Settings
<
Discharge settings
AdaptiveTime period
Sensor set power: 100 W
Total sensor power: 0 W
EN
To Next Page
Loading...