FAQs
1. WIFI signal strength
WIFI signal is recommended to be greater than -50db. if the signal is too weak it will cause unstable connection.
The strength of your model is below -70db and the data transmission is very unstable.
2. Connection is not stable
Make sure your device and your meter have the latest firmware version. Now Venus is V149 and MARSTEK P1
meter is V110.
3. HW P1 unstable or no readings
V148 can already support HW P1-meter, it is recommended to set HW P1 to be used as a static IP, and when you
can't get a reading, set CT to another type first, and then re-search for the HW P1-meter with the APP to make
sure that the APP re-searched for the P1-meter.
To Next Page
Loading...