10
After cleaning let filter dry up, then place it into the vacuum cleaner and push button on housing.
When the MICRO filter is foul and this weakens the suction power, it is recommended to replace the filter.
WARNING: Vacuum cleaner is valved. When dust bag is full, MICRO-filter or incoming airflow hole are foul, protective admission valve turns on, preventing motor of
overheating.
Cleaning / replacement of outgoing airflow filter
Unplug the device.
Remove outgoing airflow filter grating and extract the filter.
Clean MICRO filter in warm water and let it dry up.
Place MICRO -filter into the vacuum cleaner.
Place outgoing airflow filter grating correctly.
To Next Page
Loading...