Need help?Do you have a question about the Martela JAMES and is the answer not in the manual?
General| Brand | Martela |
|---|---|
| Model | JAMES |
| Category | Indoor Furnishing |
| Language | English |
To adjust the height of the seat, pull the lever up. Adjust height so knees are at about 90 degrees.
Push the knob and slide the seat for palm space between knee and seat. Lock by releasing knob.
Adjust backrest height for comfort. Lift to adjust up, lift and lower to adjust down.
Press button, move armrest to desired height. Release button to lock.
Hold armrest top and slide it forward or backward to adjust its position.
Rotate armrest top to desired angle by pressing the button. Release button to lock.
Press lever under seat, adjust armrests, lift lever to lock position.
Lift seat padding, loosen fastener with spanner, remove armrests.
Release chair by lifting lever and leaning back. Lock by pushing lever down.
Seat has free float or adjustable angle downwards 5º. Lock by rotating lever forward.
Release chair by lifting lever and leaning back. Lock by pushing lever down.
Fine-tune resistance by rotating knob under seat for easy position changes.
Adjust seat angle upwards or downwards by rotating the knob.
Release chair by pulling knob out. Lock by pushing knob in.
Adjust headrest padding upwards and downwards by holding and moving it.
Adjust lower back support by turning the triangular knob on the backrest.
To Next Page
