Do you have a question about the MartinLogan crescendo and is the answer not in the manual?
Compatibility | Bluetooth, AirPlay |
---|---|
Power Output | 50W RMS |
Wireless | Bluetooth, AirPlay |
Inputs | 3.5mm Analog |
Connector | Ethernet, USB, Analog 3.5mm |
Amplifier Power | 100 Watts (total) |
Frequency Response | 50 Hz – 23 kHz ±3dB |
Recommended placement advice for optimal audio performance and avoiding interference.
Important warnings and steps for connecting power and signal cables to the speaker.
Guide to connecting to a Wi-Fi network and understanding the status LED.
How to connect an external subwoofer for enhanced bass performance.
Explains Toslink, RCA, and 3.5mm jack connections for audio signals.
Details wired connections via Ethernet and USB for audio and charging.
Instructions for wireless audio streaming via Bluetooth.
How volume levels are controlled based on the selected input source.
Details the functions of the front panel controls and status LED.
Explains the functions of each button on the remote control for playback and settings.
Instructions for replacing the batteries in the remote control.
A table detailing remote control function compatibility across different input modes.
Guides on streaming music via AirPlay, DLNA, and from Apple devices/iTunes.
Troubleshooting common issues when connecting the speaker to a LAN.
Method to share Wi-Fi settings from an Apple device to the speaker.
Step-by-step guides for setting up Wi-Fi via web browser or direct connection.
Instructions for permanent Ethernet and direct Wi-Fi connections.
Detailed guide for connecting Apple devices via USB for audio and charging.
Steps to connect and stream audio wirelessly via Bluetooth.
Information on updating firmware and safely removing the speaker grille.
Provides contact details for MartinLogan customer support.
Details on warranty coverage, registration, serial number, and international service.
Answers common user queries regarding cleaning, cables, and device interaction.
Provides solutions for common operational issues, connectivity problems, and specific scenario resolutions.