If adapter stays in Manifold B
and proves be difficult to
remove , You may use a flat
bladed screw driver to gently
pry it from the manifold. There
will always be a small gap
between the adapter and
Manifold B. Use caution not to
damage either component.
If adapter stays in cylinder and can not be
removed by simply twisting them apart
with your hands you may need to carefully
try holding cylinder with your hands and
twisting adapter with some pliers. Use
caution to stay on the larger boss of the
adapter or you will damage the adapter
and it will have to be replaced.
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
