MAS 90 - Directions for Use

17
GB
MAS 5 MAS 10 MAS 20 MAS 30 MAS 33
MAS 60 MAS 63 MAS 80 MAS 90 MAS 400
Full body harnesses tested according to EN 361
can be equipped
with integrated hold function according to EN 358
with integrated connecting agent according to EN 354
with integrated fall energy absorber according to EN 355
with integrated rescue eyelets according to EN 1497
with integrated ascent protection eyelet
Possible equipment features
 Quick
with belt quick-release lock
 E
with single-arbour buckles in the leg belts
 Var. B 3
with belt back extension m B 3 -0.5
 Var. BFD 3
with sewn-on strip fall absorber at rear
Reception eyelet (total weight up to 100 kg)
 Var. H
Side hold eyelets,
 Var. S
with ascent protection eyelet
 Var. D
with rescue eyelets
 Var. E
with single-arbour buckle in the safety belt
These full body harnesses are authorised and tested (rated load)
for a total weight up to 136 kg.
We point out explicitly that in case of weights (rated loads)
>100 to 136 kg, all individual parts used in the fall arrest system (in particular
the FALL ENERGY ABSORBER) have likewise got to be checked for a total weight of 136 kg
and authorised.
Full body harnesses with fixed (●) and possible (○) variable equipment
features
TYPE
MAS
5
10
20
30
33
60
63
80
90
400
Rear reception eyelet
●
●
●
●
●
●
●
●
●
●
Quick
○
○
○
○
○
E
○
Var. B3
○
○
○
○
○
○
○
○
○
○
Var. BFD 3
○
○
○
○
○
Var. S
○
○
○
○
○
Var. D
○
Var. E
○
○
○
Var. H (side hold eyelets)
○
●
●
●
●
●
Front reception eyelet
●
●
●
●
●
Front reception loop
●
To find the exact type designation and information on the technical status of the test
standard, please refer to the identification on your full body harness.
Copyright © MAS GmbH · Excerpts and copies only with approval from MAS GmbH
Unterm Gallenloeh 2 - D-57489 Drolshagen - www.masonline.de 29.03.2018
Directions for use
MAS 5 MAS 10 MAS 20 MAS 30 MAS 33
MAS 60 MAS 63 MAS 80 MAS 90 MAS 400
Full body harnesses tested according to EN 361
can be equipped
with integrated hold function according to EN 358
with integrated connecting agent according to EN 354
with integrated fall energy absorber according to EN 355
with integrated rescue eyelets according to EN 1497
with integrated ascent protection eyelet
Possible equipment features
 Quick
with belt quick-release lock
 E
with single-arbour buckles in the leg belts
 Var. B 3
with belt back extension m B 3 -0.5
 Var. BFD 3
with sewn-on strip fall absorber at rear
Reception eyelet (total weight up to 100 kg)
 Var. H
Side hold eyelets,
 Var. S
with ascent protection eyelet
 Var. D
with rescue eyelets
 Var. E
with single-arbour buckle in the safety belt
These full body harnesses are authorised and tested (rated load)
for a total weight up to 136 kg.
We point out explicitly that in case of weights (rated loads)
>100 to 136 kg, all individual parts used in the fall arrest system (in particular
the FALL ENERGY ABSORBER) have likewise got to be checked for a total weight of 136 kg
and authorised.
Full body harnesses with fixed (●) and possible (○) variable equipment
features
TYPE
MAS
5
10
20
30
33
60
63
80
90
400
Rear reception eyelet
●
●
●
●
●
●
●
●
●
●
Quick
○
○
○
○
○
E
○
Var. B3
○
○
○
○
○
○
○
○
○
○
Var. BFD 3
○
○
○
○
○
Var. S
○
○
○
○
○
Var. D
○
Var. E
○
○
○
Var. H (side hold eyelets)
○
●
●
●
●
●
Front reception eyelet
●
●
●
●
●
Front reception loop
●
To find the exact type designation and information on the technical status of the test
standard, please refer to the identification on your full body harness.
Copyright © MAS GmbH · Excerpts and copies only with approval from MAS GmbH
Unterm Gallenloeh 2 - D-57489 Drolshagen - www.masonline.de 29.03.2018
Directions for use
MAS 5 MAS 10 MAS 20 MAS 30 MAS 33
MAS 60 MAS 63 MAS 80 MAS 90 MAS 400
Full body harnesses tested according to EN 361
can be equipped
with integrated hold function according to EN 358
with integrated connecting agent according to EN 354
with integrated fall energy absorber according to EN 355
with integrated rescue eyelets according to EN 1497
with integrated ascent protection eyelet
Possible equipment features
 Quick
with belt quick-release lock
 E
with single-arbour buckles in the leg belts
 Var. B 3
with belt back extension m B 3 -0.5
 Var. BFD 3
with sewn-on strip fall absorber at rear
Reception eyelet (total weight up to 100 kg)
 Var. H
Side hold eyelets,
 Var. S
with ascent protection eyelet
 Var. D
with rescue eyelets
 Var. E
with single-arbour buckle in the safety belt
These full body harnesses are authorised and tested (rated load)
for a total weight up to 136 kg.
We point out explicitly that in case of weights (rated loads)
>100 to 136 kg, all individual parts used in the fall arrest system (in particular
the FALL ENERGY ABSORBER) have likewise got to be checked for a total weight of 136 kg
and authorised.
Full body harnesses with fixed (●) and possible (○) variable equipment
features
TYPE
MAS
5
10
20
30
33
60
63
80
90
400
Rear reception eyelet
●
●
●
●
●
●
●
●
●
●
Quick
○
○
○
○
○
E
○
Var. B3
○
○
○
○
○
○
○
○
○
○
Var. BFD 3
○
○
○
○
○
Var. S
○
○
○
○
○
Var. D
○
Var. E
○
○
○
Var. H (side hold eyelets)
○
●
●
●
●
●
Front reception eyelet
●
●
●
●
●
Front reception loop
●
To find the exact type designation and information on the technical status of the test
standard, please refer to the identification on your full body harness.
Copyright © MAS GmbH · Excerpts and copies only with approval from MAS GmbH
Unterm Gallenloeh 2 - D-57489 Drolshagen - www.masonline.de 29.03.2018
Directions for use