• If inside the passenger compartment
there are conditions of high
temperature and humidity, when the
A/C compressor is switched on (A/C
touch screen button illuminated on
MTC display or LED on air
conditioning panel A/C button ON)
there may be some cold steam at
ventilation port outlet: this situation
is normal and does not indicate air
conditioning system malfunction.
• Automatic Temperature Controls
(ATC) will automatically adjust the
climate control settings to reduce or
eliminate window fogging on the
front windshield.
• Make sure the air intake, located
directly in front of the windshield, is
free of obstructions such as leaves or
other objects. Leaves collected in the
air intake may reduce airflow, and if
they enter the plenum, they could
plug the water drains. In winter
make sure the air intake is clear of
ice, slush, and snow.
• The climate control system filters
outside air containing dust, pollen
and some odors. Strong odors
cannot be totally filtered out. See
“Maintenance Procedures” in section
7 for filter replacement instructions.
• The temperature can be displayed in
U.S. or Metric units by selecting the
US/M customer programmable
feature. See “MTC Settings” in this
section.
• Any time you store your vehicle or
keep it stationary (i.e., during
vacation) for two weeks or more,
run the air conditioning system at
idle for about five minutes in the
fresh air by high blower setting. This
will ensure adequate system
lubrication and minimize the
possibility of compressor damage
when the system is started again.
Phone and Voice Controls
on Steering Wheel
(optional)
The controls on the right side of the
steering wheel activate/deactivate the
phone mode and the voice control
functions.
These functions are only available
when one or more Bluetooth
®
compatible mobile phones are paired
with the MTC System connection: to
pair a phone and to learn all available
functions refer to the MTC guide.
Dashboard Instruments and Controls
4
181
To Next Page
Loading...
