Drive Mode
Keys (buttons) on the side of the shift
lever only have two states: OFF and
ON. The OFF state (button released) is
the standard function mode. The ON
state is activated by pressing the
button, the dedicated LED will
illuminate. It is necessary to press the
button for at least 3 seconds.
The table shows the different drive
modes according to the state of the
buttons.
Button OFF – Button released ON – Button pressed (LED ON)
Electronic Stability Control ESC
activated
Electronic Stability Control ESC
partially deactivated
M Autoshift Mode (Auto) Manual shift mode (Manual)
ICE
Increase Control Efficiency
mode OFF
Increase Control Efficiency mode ON
(*)
SPORT Normal drive mode (Normal) Sportier drive mode (SPORT)
(**)
Soft suspensions setting (Soft) Hard suspensions setting (Hard)
(*)ICE(Increase Control and Efficiency) operates on engine output in order to
reduce fuel consumption, and emissions by dampening vehicle reactions
(control). The current mode is also useful for low grip surfaces.
(**) Optional equipment for AWD model only.
Driving
5
195
To Next Page
Loading...
