Activation/Deactivation of
Drive Mode
To activate a driving mode, briefly
press the corresponding button. The
LED beside the button will light along
with the indicator light on the display,
combined with a specific message for 5
seconds or the specific symbol of the
set mode (see example in figure).
To activate
button press the
corresponding button for at least 3
seconds.
To disable the mode, press the button
again: the LED or symbol on the cluster
will turn off.
M (Manual) Drive Mode
In this mode, the transmission interacts
with the driver in order to allow
manual shift and ensure increased
control of the vehicle. The current
mode allows the gear system to
optimize the engine brake action,
prevent undesired shifting into a
higher or lower gear and improve the
overall performance of the vehicle.
This mode allows you to move the shift
lever step by step forward (-) or
backward (+) without pressing the lock
button. The current transmission gear
is displayed on the instrument cluster
beside “M”.
Using the shift paddles behind the
steering wheel (if present), the
corresponding icon will display beside
the “M” indication and currently
engaged gear.
Pull the right shift paddle (+) towards
the steering wheel and release it to
enter the higher gear; do the same
operation with the left shift paddle (-)
to enter the lower gear.
Driving
5
198
To Next Page
Loading...
