Keys
This vehicle is equipped with a Remote
Keyless Entry transmitter and a Keyless
Ignition Node, to enter, start and
protect the vehicle.
Keyless Ignition Device
This device allows the driver to
operate the ignition switch with the
push of a button, as long as the
Remote Keyless Entry (RKE) transmitter
is inside the vehicle.
The Keyless Ignition Node (KIN) has
three operating setups indicated on
the outer ring. Pressing and releasing
the middle button, you can switch
from one setup to the next without
starting the engine, the “switched on”
indication will turn amber.
The engine will start by pushing the
center button START/STOP with the
brake pedal pressed and the device set
in any of the three operating setups.
In case the ignition switch does not
change by pushing the button, the
RKE transmitter (key fob) may have a
low or discharged battery. If this occurs
it is necessary to replace the battery in
order to operate the ignition switch
(see “Requiring and Setting Additional
Key fobs” in this section).
Before Starting
2
22
To Next Page
Loading...
