battery clip, located on the back
cover.
• Replace the printed circuit board by
using the indicated pin for the
sealing of the two covers.
• Assemble the key fob case and
reassemble the two lateral covers: a
click will indicate successful sealing.
• Combine the disassembled parts
with clamping screw and reassemble
the emergency key.
Radio Frequency RKE
Transmitter - General
Information
This device complies with Part 15 of
the FCC rules and RSS 210 of Industry
Canada.
The current device feature is subject to
following conditions:
• This device may not cause harmful
interference.
• This device must accept any
interference received, including
interference that may cause
undesired operation.
If your key fob RKE transmitter fails to
operate from a normal distance, check
for these two conditions:
• A weak battery in the key fob RKE
transmitter. The expected life of the
battery in normal use is a minimum
of three years.
• Closeness to a radio transmitter such
as a radio station tower, airport
transmitter, and some mobile or CB
radios.
Remote Start System
(optional)
This system enables the key fob RKE
transmitter to start the engine
conveniently from outside the vehicle
while still maintaining security. The
system has a range of approximately
300 ft (91 m). Obstructions between
the vehicle and the key fob may
reduce this range.
General Information
This device complies with Part 15 of
the FCC rules and RSS 210 of Industry
Canada. Operation is subject to the
following conditions:
• This device may not cause harmful
interference.
• This device must accept any
interference received, including
interference that may cause
undesired operation.
NOTE:
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
Before Starting
2
35
To Next Page
Loading...
