This regulator switch has 4 different
positions:
0
(OFF)
Stable position: lower level
of the internal and night
lighting.
1
st
Dimmable position: allows
minimum to maximum
brightness tuning of the
instrument cluster dials,
display, control switches and
MTC’s backlight, including all
displayed messages and
night lighting.
2
nd
Stable position: allows
maximum brightness set.
3
rd
Stable position: allows to
switch on the main and
reading lights of the front
dome light.
Interior Lights Regulators (only with
Full-LED Headlights)
The regulation devices rotate from
position “0” upward and back
downward performing stable and
dimmable positions.
The left regulator switch has 4
different positions:
0
(OFF)
Stable position: lower level
of the internal lighting.
1
st
Dimmable position: allows
minimum to maximum
brightness tuning of the
instrument cluster dials,
display, control switches and
MTC’s backlight, including all
displayed messages and
night lighting.
2
nd
Stable position: allows
maximum brightness set.
3
rd
Stable position: allows to
switch on the main and
reading lights of the front
dome light.
NOTE:
The left regulator operates only with
park lights or low beams lights on.
The right regulator has 2 different
positions:
0
(OFF)
Stable position: night
lighting off.
1
st
Dimmable position: allows
minimum to maximum
brightness tuning of the
front dome light LED and the
night lighting.
NOTE:
The right regulator is only active if the
switch is in “AUTO” or in low beam
mode
.
Understanding the Vehicle
3
119
To Next Page
Loading...
