4
101
Dashboard Instruments and Controls
Press and release the multifunction
switch to access the submenus.
Scroll with the multifunction switch in
the or arrow directions to view
the selectable items:
• Speed Warning: in order to set this
function see example below.
• Electric Parking Brake: in order to
modify the status of electric parking
brake, see chapter “Parking Brake” in
section “Starting and Driving”.
• Passenger Air bag (if foreseen):
in order to modify the status of
passenger air bag, : paragraph
“Passenger's Air bag Deactivation"
in “Supplemental Restraint Systems
(SRS) – Air bag” of section “Safety” .
• Screen Setup: see chapter "TFT
Display Setting and Menu Overview"
in this section.
Example to modify the "Speed
Warning" status
NOTE:
• Minimum set speed: 30 km/h (20
mph).
• Maximum set speed: 280 km/h (175
mph).
When the vehicle is in motion (above 8
km/h
–
5 mph) this function is available
and displayed in the list of “Vehicle
Settings” menu.
Scroll with the multifunction switch in
the or arrow directions to view
the selectable items.
Press and release the multifunction
switch to select “Speed Warning”.
Press and release the multifunction
switch once again to view the
related options: “Off” is the default
status.
Scroll with the multifunction switch in
the or arrow directions to view
the selectable options.
Speed values are in loop, keeping the
multifunction switch pressed in the
or arrow directions will increase
scroll speed in step of 5 km/h (5 mph).
Press and release the multifunction
switch to select the option. A
check mark will remain next to the
previously-selected item until a new
selection is made.
To Next Page
Loading...
