4
146
Dashboard Instruments and Controls
NOTE:
• To activate and deactivate the
function, the user have 10 attempts
to type a 4 digit PIN before system
cancels the deactivation. The user can
try again in 30 minutes.
• If you do not enter all PIN digits, a
prompt will indicate that you should
do so.
• In case of incoming call while
entering the PIN, the MIA system will
temporarily stop the release function.
As soon as the call is over, the keypad
screen will be displayed again so that
you can enter the PIN.
"Valet Mode" activated will be
indicated in the main status bar with
a lock symbol combined with the
Profile icon. In this condition if user
touch the Profile icon in the main
status bar a popup will indicate that
the function is not available in Valet
Mode.
To Exit Valet Mode Function
To exit Valet Mode function touch
the "Exit Valet Mode" soft-key in the
"Welcome" pop-up at key on.
Deactivate the function by entering
the lock PIN code as previously
specified.
NOTE:
Valet Mode function cannot be
deactivated while the vehicle is in
motion.
Air Conditioning Controls
The vehicle is equipped with an
automatic dual-zone air conditioning
system that allows to adjust separately
the temperature and the airflow
distribution in the left and in the right
zone of the passenger compartment,
according to the requests of the driver
and the front passenger.
A humidity sensor, positioned on the
inner surface of the windshield, over
the rear view mirror, allows the A/C
system to prevent/eliminate fogging of
the windshield and side windows.
The best efficacy in preventing
fogging is obtained by selecting the
"AUTO" function, described later. A
dual zone solar sensor helps to achieve
the best comfort in presence of solar
radiation.
Climate Controls
This system can be operated by using
the controls of the climate control
panel on the dashboard, or the
soft-keys on the MIA display when
"Comfort" mode is selected.
To monitor the comfort parameters on
board, you can also access the widget
page from the "Home" screen and
choose the "Climate" widget (see
example in picture).
To Next Page
Loading...
