2
21
Understanding the Vehicle
Seat Forward/Rearward Adjustment
The seat can be adjusted both forward
and rearward.
Push the seat switch 1 forward or
rearward, the seat will move in the
direction of the switch.
Release the switch 1 when the desired
position is reached.
On some versions, the passenger seat
can be adjusted front- and rearward
manually.
In order to adjust the seat forward
or rearward, push the lever 3 located
below the seat cushion and manually
move the seat forward or rearward.
Release the lever once you have
reached the desired position.
Seat Up/Down Adjustment
The height of the seat can be adjusted
up- or downward.
Grip switch 1 from the back side and
push it down or up.
Release the switch 1 when the desired
position is reached.
Seat Tilt Control (Up/Down)
The angle of the seat cushion can be
adjusted in four directions.
Pull upward or push the front of the
switch 1 , to move the front cushion
seat in the direction of the switch.
Release the switch 1 when the desired
position is reached.
Seat Back Manual Control
The angle of the seatback can be
adjusted forward or rearward.
To recline, lean forward slightly, lift
the lever 2 , then push back to the
desired position and release the lever.
Lean forward and lift the lever 2
to return the seatback to its normal
position. Using body pressure, lean
forward and rearward on the seat to
be sure the seatback has latched.
Power Lumbar ( )
Push the switch 4 forward or rearward
to increase or decrease the lumbar
support.
Push the switch 4 upward or
downward to raise or lower the
lumbar support.
To Next Page
Loading...
