Maserati Ghibli - Page 95

4
93
Dashboard Instruments and Controls
- Audio: Radio, Media and Projection
Mode
- Key-On Display
- Key-Off Display
- Defaults
How to Set TFT Display
To set the TFT display it is necessary
to select the "Screen Setup" submenu
from the "Vehicle Settings" menu,
proceeding as follows.
After having entered the "Vehicle
Settings" menu, press and release the
multifunction switch in the or
arrow directions until "Screen Setup"
is displayed.
Press and release the multifunction
switch to access the available items
for this submenu.
If the vehicle exceeds 8 km/h (5 mph),
this function is unavailable and the
main screen shows possible options in
grey (not activable).
Operate this function with the vehicle
stopped and transmission in P (Park)
position.
In order to enter a function, press the
multifunction switch .
The following directory shows the
items available in this submenu:
Upper Left
• None
• Compass (only with navigation
system)
• Outside Temperature (default: Upper
Right)
• Date
• Time
• Time/Date (default: Upper Left)
• Range to Empty
• Average L/100km or km/L (or MPG)
• Current L/100km or km/L (or MPG)
• Trip A Distance
• Trip B Distance
Upper Right (example in picture)
• None
• Compass (only with navigation
system)
• Outside Temperature (default: Upper
Right)
• Date
• Time
• Time/Date (default: Upper Left)
• Range to Empty
• Average L/100km or km/L (or MPG)
• Current L/100km or km/L (or MPG)
• Trip A Distance
• Trip B Distance
Main Menu: Line 1 (only displays in
Main Menu)
• None (default status)
• Compass (only with navigation
system)
• Outside Temperature
• Date
• Time
• Time/Date
• Range to Empty
• Average L/100km or km/L (or MPG)
• Current L/100km or km/L (or MPG)
• Trip A Distance
• Trip B Distance
• Audio
Main Menu: Line 2 (only displays in
Main Menu)
• Same configurable options as Line 1
Main Menu: Line 3 (only displays in
Main Menu)
• Same configurable options as Line 1
MPH km/h Display (instruction line)