E
G
F
H
4
102
Replacing radio operated
control batteries
If you press one of the three buttons
and this does not activate the
corresponding function, before
replacing the batteries, check for
correct operation of the alarm system
functions using the other remote
control.
To replace the remote control battery:
- extract the key by pushing the
button E;
- undo the screw F;
- extract the battery holder G;
- remove the battery H from its
retaining ring;
- fi t a new battery of the same type,
observing the indicated polarity;
- fi t the battery support G into the
remote control and secure it by
tightening the screw F.
To Next Page
Loading...
