4
115
“Follow me home” function
This function allows you to set a
timing for activation of the position
lights and low beams, so that they
may remain on for a set time after
turning off the vehicle.
This function is activated by pushing
the lever on the steering column
switch, used to fl ash the headlights.
The position lights and low beams
turn on for 30 seconds, the message
“Follow me” appears on the
instrument panel display for 20
seconds, and the light activation time
is displayed.
When this function is active, every
time the lever for fl ashing the
headlights is operated, the time the
lights remain on is increased by 30
seconds, with a maximum total time
of 210 seconds. The display will show
the time set.
If the lever for fl ashing the headlights
is operated for more than 2 seconds,
the function is deactivated, and the
indicator on the instrument panel
display goes off.
When the function is active, turning
the key back to MAR deactivates the
system.
To Next Page
Loading...
