G
D
F
C UFE
E
H
M
L
N
P
R
O
Q
6
183
opposite side of the rod.
- Pull out the rod slightly to release
the compact spare wheel from the
internal retaining clamp.
- Remove the entire spare wheel
and tools from the luggage
compartment.
To retrieve the tools from inside the
compact spare wheel:
- Remove the rod completely C from
the cover D.
- Remove the cover D by unscrewing
the two wing nuts E and the
washer F. Both the cover and the
plastic support with pins G will be
freed.
The container inserted in the compact
spare wheel contains:
• an electric compressor H, complete
with pressure gauge and fi tting for
infl ating the compact spare wheel;
• telescopic spanner L with rubber-
coated handle for unscrewing/
tightening the wheel bolts;
• an adapter M to be fi tted to the
spanner for the wheel nuts;
• a jack N.
- Open the cover of the compressor
and remove the hose with the
pressure gauge O and the cable
with a plug P for the power socket.
- Unscrew the valve cap of the
compact spare wheel and screw the
fi tting Q of the infl ation hose onto
the valve.
To Next Page
Loading...
