EasyManua.ls Logo

Maserati GRANCABRIO - Windscreen Wiper

Maserati GRANCABRIO
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
236
Windscreen wiper
Clean the rubber parts regularly using
the appropriate products.
Change the blades if the edge of the
rubber is deformed or worn. In any
case, the blades should be changed
about once a year.
Travelling with worn wiper
blades is very dangerous
because it reduces the
visibility in the event of poor
atmospheric conditions.
The arms of the wiper
blade have to be replaced
with new ones after two
disassembling operations. The special
arm fi xing system guarantees the
perfect mechanical stability only after
the fi rst two refi tting operations,
provided that the specifi ed tightening
torque is observed.
We recommend therefore
that you have any
interventions involving the
removal of the windscreen wiper
arms carried out at a Centre of the
Maserati Service Network.
Some simple measures may reduce the
possibility of damage to the blades.
- In the case of temperatures below
zero °C, check that ice has not
stuck the rubber part against the
windscreen glass. If necessary,
release with an anti-ice product.
- Remove any snow on the
windscreen: as well as protecting
the blades, this avoids forcing and
overheating the electric motor.
- Do not activate the windscreen
wipers when the windscreen is dry.
Spray nozzles
If the jet does not work, fi rst check
that there is fl uid in the pan (see
“Level checks” in this section) then
check that the nozzles are not
clogged.
Replacing the wiper blades
Due to the diffi culty of this operation,
we recommend that you contact
the Maserati Service Network for
replacement.

Table of Contents

Related product manuals