2
41
If the driver’s seat belt is not fastened,
when you turn the ignition key to
position II, the warning light C comes
on.
Care should be taken to
avoid contamination of
the webbing with polishes,
oils and chemicals, and particularly
battery acid. Cleaning may safely
be carried out using mild soap and
water. The belt should be replaced
if webbing becomes frayed,
contaminated or damaged.
Unfastening the seat belts
- Press the release button D.
- Guide the seat belt buckle A back
to its rest position.
No modifi cations or
additions should be made
by the user which will either
prevent the seat belt adjusting
devices from operating to remove
slack, or prevent the seat belt
assembly from being adjusted to
remove slack.
Child restraints
Child restraint anchor fi ttings
Your vehicle has been designed to
accommodate child restraints on
the rearmost seats. When using a
child restraint, read the Installation
Instructions supplied with the child
restraint and follow the directions for
fi tment carefully.
The childseat is secured in the vehicle
using the adult seat belt assembly
and the tether strap (provided with
the child seat) is secured to the child
restraint anchor fi tting.
C
A
D
To Next Page
Loading...
