1
2
48
If the user recalls the information
page showing the pressure levels
of each tyre, dashes “–.–” will be
displayed in the place of the values.
Viewing messages on the
display
By pressing the “MODE” button A
repeatedly (see on page 72), the user
can access the information page that
shows the pressure values of each tyre
(“Tyre Pressure” page).
If system faults are found when
this page is recalled, the same page
will be replaced by an information
message on the problem found. Also
in this case, the information message
will be displayed for a preset time.
When the display time has elapsed,
the “Tyre Pressure” screen page
becomes available again, but the
summary symbol for the malfunction
will remain displayed in the dedicated
area, until the malfunction is
corrected.
Normal conditions
By pressing the button provided for
quick information display (“MODE”
button A pressed briefl y), the user can
access the information page (screen
page 1), which displays the pressure
levels for each tyre.
To Next Page
Loading...
