EasyManua.ls Logo

Maserati Gransport - Emergency starting

Maserati Gransport
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
134
Emergency starting
Emergency starting
If the MASERATI CODE does not
deactivate the engine immobilizer, the
warning light CODE is
permanently lit, whereas the warning
light OBDII
U
turns off after 4
seconds and then switches on again
immediately. In these conditions the
engine cannot be started. To start the
engine, it is necessary to follow the
emergency starting procedure.
WARNING: We recommend to carefully
read the entire procedure before
carrying it out. If you make a mistake,
you should turn the starter key to STOP
and repeat the operations from the
beginning (step 1).
1) Read the five-digit electronic code
on the CODE CARD.
2) Turn the ignition key to the MAR
position: the CODE
and OBDII
U
warning lights will remain lit.
3) Press down the accelerator pedal
and keep it pressed. After about 8
seconds, the warning light OBDII
U
turns off: you can now release the
accelerator pedal and start counting
the number of times the warning light
OBDII
U
flashes.
4) As soon as the displayed number of
flashing is equal to the first digit of
your CODE CARD, press down the
accelerator pedal and keep it pressed
until the warning light OBDII
U
turns
off after having remained on for about
4 seconds: then release the accelerator.
The warning light OBDII
U
will start
flashing again: as soon as the displayed
number of flashing is equal to the
second digit of your CODE CARD, press
down the accelerator pedal and keep it
pressed.
5) Proceed as above for the remaining
digits of your CODE CARD.
6) Enter the last digit and keep the
accelerator pedal pressed down. The
warning light OBDII
U
turns on for 4
seconds and then switches off: you can
now release the accelerator.
7) Rapid flashing of the warning light
OBDII
U
(for about 4 seconds)
confirms that the operation has been
completed correctly.
8) Start the engine by pressing the
START button.
If the warning light OBDII
U
remains
lit, turn the key to STOP and repeat the
procedure from step 1.
WARNING: After an emergency
starting, we recommend to contact
your Authorized Maserati Dealer as
the emergency procedure must be
then carried out each time the vehicle
is started until the vehicle is serviced.

Table of Contents

Related product manuals