6
144
If an exterior light goes out
Directional indicator lights
To replace the direction indicator light
bulb (5W):
1) Push forward the directional
indicator to press on the spring clip H.
2) Remove the rear part releasing the
retaining tab L and remove the unit.
3) Remove the bulb holder M turning it
in an a counter direction.
4) Remove and replace the bulb.
5) Refit the bulb holder turning it in a
clockwise direction.
6) Refit the direction indicator
inserting first the retaining tab on the
rear part and then pressing the front
part until hearing the spring clip click
into position.
WARNING: Proceed with care when
removing the side directional indicator
light to avoid damages to the car body
or to the indicator itself.
1
2
L
H
M
To Next Page
Loading...
