6
If an interior light goes out
147
Vanity mirror light
To replace the bulb (12V – 5W
torpedo):
1) Remove the fixing plate by levering
it out at points E.
2) Replace the bulb.
3) Refit the fixing plate by pressing it
into place.
Glove compartment light
To replace the bulb
(12V - 5W “torpedo” type):
1) Remove the lens by levering it out
gently in point F with a flat head
screwdriver.
2) Replace the bulb.
3) Refit the lens, inserting first the two-
tab side and then pressing on the other
side.
Courtesy lights (below door)
To replace the bulb (12V - 5W all glass):
1) Lever it out gently from its ceiling
light seat G with a flat head
screwdriver and remove it.
2) Press the sides of lens H to release
the retaining tabs and remove the lens.
3) Replace the pressure-fitted bulb.
4) Refit the lens.
5) Refit the lighting unit inserting first
the electrical connector side and then
pressing on the other side to hook up
the clip.
E
E
E
F
H
G
To Next Page
Loading...
