3
56
Controls and interior equipment
Controls and interior
equipment
Hazard warning lights
Press button A to turn on the hazard
warning lights. Their operation does
not depend upon the position of the
ignition key. Press the button again to
turn them off.
When these lights are on, the
directional indicators, the related
warning lights on the instrument
panel and the button are flashing.
WARNING: When the hazard warning
lights are activated, the directional
indicators control is disabled.
MSP system
The MSP system is automatically
activated when starting the engine.
It is possible to disconnect or reconnect
the system during running by pressing
button B. To prevent inadvertent
deactivation, the button is to be
pressed for about 2 seconds for
deactivating the MSP system.
When the MSP system is on, the button
led is off, when the system is on the
MSP warning light on the multi-
function display lights up.
When the system is off, the LEDs on the
pushbutton and the letters on
the multifunction display light up.
SPORT setting
Pressing button C will select the SPORT
mode, which sets the suspensions,
traction control and Cambiocorsa
gearbox (if available) to a racing-type
driving style.
Please note that selecting the SPORT
mode strongly decreases driving
comfort, especially in city traffic and
on uneven roadbeds.
MSP
A
MSP
B
MSP
C
To Next Page
Loading...
