4
161
Dashboard Instruments and Controls
replaced with “Rec”. If the session gets
interrupted, the status "Incomplete" will
be displayed.
On the right of the screen there are two
interactive soft-keys: “Reset Last” and
“Reset All”. "Reset Last" resets the value
reported in the "Last" column while
"reset all" resets all values.
When the user taps on the reset button,
a confirmation pop up appears; scroll
and push to confirm or touch “No” soft-
key.
Accessory Gauges
Touching this soft-key, the Performance
"Accessory Gauges" page shows three
different gauges: Oil Temperature,
Transmission Temperature, Battery
Voltage.
Functions of Controls Menu
on MIA
The MIA system uses a combination of
keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the “Controls” screen,
use the touch soft-keys to scroll and
change settings of the customer
programmable functions.
Touch the function soft-key to confirm
the selection.
Some functions can be set only on or
off touching the corresponding soft-key
which will be highlighted with the yellow
outline (example: "Mirror Dimmer").
Other functions can have one or more
instruction/setting pages that are
accessed by touching the corresponding
soft-key (example: "Surround View
Camera").
NOTE:
• All settings must be edited with
ignition device set to ON position.
• Some of the customer programmable
functions are optional or for a specific
model/version and may not be
available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
• Screen Off
This function allows you to switch off
the MIA screen backlight if it becomes
annoying when driving.
• Mirror Dimmer
The auto-dimming function can be
disabled or re-enabled by touching this
soft-key. See "Rear-View Mirrors" in
section "Understanding the Vehicle" for
further details.
• Surround View Camera
Activating this function the system
uses four cameras to monitor the area
around the vehicle when transmission
is moved in P (Park), N (Neutral) or D
(Drive) mode.
When activation occurs by touching
the “Surround View Camera” soft-key
in the “Controls” screen or moving the
To Next Page
Loading...
