5
234
Driving and Driver Assistance Systems
Steering Wheel" in section "Dashboard
Instruments and Controls").
In the standard configuration there is a
specific button to enable and disable the
CC.
Control "pulse activation" buttons have
the following functions:
Configuration
ON/OFF "pulse activation"
button to engage/disengage CC
system.
• SET+ / SET - : Increase /
Decrease speed, set current
speed.
• RES: Resume previously set
speed when system is in
canceled status.
•
CANC: Deletes the set
speed.
In order to ensure proper operation, the
CC system has been designed to shut
down if multiple systems are operated
at the same time (example: CC and
FCW). When conditions so allow, the CC
system can be reactivated by pushing
the RES button.
Displayed Information
Apart from the pop up messages at the
center of the display, CC system status
is represented by icons on the display,
in the dedicated area. See "Instrument
cluster overview" in section "Dashboard
Instrument and Controls".
Displayed information depends on
system status: ready, set, temporarily
canceled or override.
Activation
To turn the system on, push the
ON/OFF button. The white light with
beside 3 dashes on the display will
illuminate.
To turn the system off, push the
ON/OFF button a second time. The
white light will turn off.
WARNING!
Never leave the Cruise Control
system on when not in use. You could
accidentally set the system or cause it
to go faster than you want. Always
leave the system off when you are not
using it.
Speed Range of Use
Speed MPH (km/h)
Minimum 20 (30)
Engaged/activated 20 (30)
Maximum 130 (210)
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
To Next Page
Loading...
