MASERATI GRANTURISMO MC TROFEO/GT4 SERVICE MANUAL
64
Ver 1.0 2/16
Insert spacers on the other joint on both sides, to fill the clearance, as shown in the photos
below.
Assemble the nuts with medium strength (blue) thread locker. Tighten with the specified
torque. Check that the suspension assembly moves freely, by hand.
Pull the lower arm towards the rear and locate the contact point. Under normal conditions it
should be in the front joint. Apply spacers as needed to fill the clearance on the other side of
the joint, as shown below.
To Next Page
Loading...
