Maserati GRANTURISMO MC - Hub Carrier Assembly

MASERATI GRANTURISMO MC TROFEO/GT4 SERVICE MANUAL
66
Ver 1.0 2/16
11.3. Hub carrier assembly
Follow the procedure below to assemble the suspension arms to the hub carriers.
11.3.1. Front Hub Carrier
Put the upper arm in its seat on the hub carrier.
Fit the washer and screw on an adjustment nut to be used to fit the tapered coupling of the
arm in the bushing on the hub carrier.
Fit a socket wrench in the hexagonal seat on the arm threaded pin.
Holding the threaded pin still, tighten the adjustment nut to a torque of 63 Nm.
Fully unscrew the adjustment nut and fit a new arm fastening nut on the threaded pin.
Tighten the retaining nut to a torque of 63 Nm.
Fit the lower arm in its seat on the hub carrier.
Fit the washer and screw on an adjustment nut to be used to fit the tapered coupling of the
arm in the bushing on the hub carrier.