2
46
Understanding the Vehicle
• Specific tuning: 2 different set-up
that can be chosen by the customer
for characterizing their listening
experience:
EX3MA: precise soundstage with
extreme openness, clarity and speed;
REFERENCE: full and balanced sound
perception with enhanced bass.
• 2D and 3D Surround, with intensity
level (for 3D Surround only): customer
can select 2D and 3D Surround
achieved with a proprietary surround
sound algorithm.
Sonus faber has a natural sound
delivered by consistent application of
key technologies and philosophy design
approach.
Signature ‘Voice of Sonus faber’ sound
is achieved by optimizing the phase and
amplitude alignment between midrange
and tweeter.
Natural materials and proprietary
loudspeaker design and construction
are used to deliver unique tonal balance
throughout the vehicle cabin.
Each speaker is driven by a dedicated
power tailored Class-D Dual DSP
amplifier stage.
This surround effect is available from any
audio source - AM/FM/Satellite Radio
or USB input and is activated through
the MIA system controls (see “Functions
of Settings Menu on MIA" in section
"Dashboard Instruments and Controls").
All information on the current operational
mode can be found in the specific
booklet visible on the MIA screen.
Fader control is available in surround
mode but it should be set to the
centre position for optimal surround
performance.
Cargo Area
WARNING!
To help protect against personal injury,
passengers should not be seated in the
rear cargo area. The rear cargo space
is intended for load carrying purposes
only, not for passengers, who should sit
in seats and use seat belts.
Vehicle Load Carrying Capacity
The load carrying capacity of your
vehicle is shown on the vehicle
homologation label positioned on the
rear driver door's ledge.
The information indicated on the label
concerns passengers and luggage
loading operations.
Do not exceed the specified Gross
Vehicle Weight Rating (GVWR) or the
Gross Axle Weight Rating (GAWR), both
front and rear.
To Next Page
Loading...
