2
31
Understanding the Vehicle
Once the high beams are physically on,
the blue indicator on the left side of the
cluster display comes on.
NOTE:
• The function is enabled only if the
brightness sensor detects the right
lighting conditions and then switch to
low beam on.
• Broken, muddy, or obstructed
headlights and taillights of vehicles in
the field of view will cause headlights
to remain on longer (closer to the
vehicle). Also, dirt, film, and other
obstructions on the windshield or
camera lens will cause the system to
function improperly.
Interior Lighting
The interior and external approach lights
turn on and off when entering/exiting
the vehicle (see “Illuminated Entry/Exit”
in section “Before Starting” for further
information).
Dome Lights
The dome lights integrated into the
front dome console, include two reading
lights.
The reading lights automatically turns
on when one of the doors is opened and
turns off when the door is closed (timed
switching off).
The reading lights are controlled by the
respective side buttons.
If they are turned on by pressing the
button, they will stay on for about 10
minutes after turning the engine off, and
will then turn off gradually.
To Next Page
Loading...
