4
156
Instruments and Controls
soft-key illuminates when the A/C is
on. For further details, see paragraph
"Climate Control Functions" in this
chapter.
Temperatures can be set between 56
°F (14 °C) and 88 °F (30 °C), if outside
of range LOW/ LO or HIGH/ HI will
appear in the display.
3. Driver's temperature control
Provides independent temperature
control. Touch the soft-key for
cooler temperature.
Touch the soft-key for warmer
temperature. The temperature setting
will be displayed on the upper status
bar.
The temperature can also be adjusted
by touching and sliding the bar
towards soft-key , to increase
temperature, or towards soft-key
to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar.
NOTE:
In “SYNC” mode, this control will also
automatically and simultaneously
adjust the passenger temperature.
4. Passenger temperature control
Provides the passenger with
independent temperature control.
Touch the soft-key for cooler
temperature. Touch the soft-key
for warmer temperature. The
passenger's temperature setting will
be displayed on the upper status bar.
The temperature can also be adjusted
by touching and sliding the bar
towards soft-key , to increase
temperature, or towards soft-key
to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar as for the driver's
side.
NOTE:
Adjusting passenger temperature
while in "SYNC" mode will
automatically exit "SYNC".
5. Recirculation
Press to change the current setting,
the relevant soft-key illuminates to
indicate which recirculation function
is activated. For further details,
see paragraph "Climate Control
Functions" in this chapter.
6. Blower control
Blower control is used to adjust the
amount of air forced through the
climate system. Eight levels of blower
speed can be selected. Adjusting the
blower will cause automatic mode to
switch to manual.
On the MIA display, touch the number
corresponding to the blower speed
you want to set.
When the MIA is displayed in any
category other than “Climate”, the
blower speed is indicated by the
number in the "Comfort" soft key of
the main category bar.
7. AUTO
This function automatically controls
the interior temperature by adjusting
the air flow rate and the air
distribution respectively on the driver
and on the passenger zone. Press
"AUTO" to switch the ATC between
manual and automatic mode. The
“AUTO” soft-key illuminates when
the automatic function is activated.
See “Automatic Temperature Control
(ATC)” in this chapter for more
information.
8. MAX defrosting/demisting
Press the button or the MIA soft-
key to switch the airflow setting to the
windshield and the front side windows
to get quick defrosting/ defogging.
The MIA soft-key illuminates when
this function is activated. Operating
this function will cause the ATC to
switch into manual mode: so the MIA
soft-key will turn off. With engine
off, the blower will run at minimum
speed (level 1) and can be increased
To Next Page
Loading...
