2
55
Understanding the Vehicle
phones (maximum power available 15
W) compatible with the Qi
®
standard.
The system is activated in automatic
mode when the mobile phone is
placed in its compartment.
If the mobile phone is removed from
the Wireless Charger compartment
during the wireless charging phase,
this will automatically be interrupted.
The Wireless Charger system enables
charging when all doors are closed
properly and the engine is ON (except
in case of remote start)..
CAUTION!
•
Key fob must not be placed on the
Wireless Charger compartment. This
could cause excessive overheating
and damage to the key fob. Placing
the key fob in the Wireless Charger
compartment may prevent the
engine from starting. In this case, a
dedicated message will be shown on
the MIA screen to alert the driver of
the need to remove the key fob from
this compartment.
•
Do not place any other type of metal
or magnetized object (e.g. credit
cards, coins, badge, etc.) inside the
Wireless Charger compartment.
•
Make sure that you place the mobile
phone correctly (display facing
upward) in the phone drawer:
charging may not be enabled if it is
in the wrong position.
•
To avoid interference with the key
fob search, the Wireless Charger
system stops charging when any door
is opened.
•
Make sure that there are no metal
objects between the mobile phone
and the wireless charger system
during charging. Any such objects
could overheat.
The charge status icon of the mobile
phone housed in the Wireless Charger
compartment is always visible on the
MIA in the "Home" and "Phone"
screen.
This icon becomes blue if the mobile
phone is charging, green if it is
fully charged and blinking red for
system fail or foreign object in the
compartment. The blink ends after a
timeout of 5 seconds and the icon
becomes solid until the fail is solved.
You can also drag and drop the
Wireless Charger icon from the
shortcut page to insert it in the upper
status bar.
To Next Page
Loading...
