4
139
Instruments and Controls
Setup, Geolocation, Software Updates,
System Information and Reset.
Display
Touch this soft-key to set the following
modes.
• Language
When in this display, you can
select one language for all display
descriptions, including the trip
functions and the navigation system.
The available languages are specific to
the target markets.
• Display Mode
When in this display, you can select
"Auto" or "Manual" mode.
•
Display Brightness with Headlights On
When "Display Mode" function is in
"Manual" mode, you can select the
brightness with the headlights on (night
condition). Adjust the brightness from
level 0 to 10 with the “+” and “–” setting
soft-keys or by selecting any point on
the scale between the “+” and “–” soft-
keys.
• Display Brightness with Headlights Off
When "Display Mode" is in "Manual"
mode, you can select the brightness
with the headlights off (day condition).
Adjust the brightness as previously
explained for "Headlights On" setting.
• Units
After touching the “Units” soft-key,
depending on the market, you may
select between “Metric-A” and
"Imperial" or “Metric-B” and "Imperial"
or “US” and "Metric-A" or "Custom"
units of measure. Selecting "Custom",
you may choose your personal
configuration. Each unit of measure
can be independently displayed in
the TFT Display and in the navigation
system. The following selectable units
of measure are listed below:
- Speed unit:
select from: “MPH” or “km/h”.
- Distance unit:
select from: “mi” or “km”.
- Fuel Consumption unit:
select from: “MPG (US)”, “MPG (UK)”,
“L/100km” and “km/L”.
- Pressure unit:
select from: “psi”, “kPa” or “bar”.
- Temperature unit:
select from: “°F” or “°C”.
- Torque unit:
select from: “lb-ft” or “Nm”.
• Touchscreen Beep
When in this display, you can turn on
or shut off the sound activated by
pressure of a touchscreen soft-key.
• Show Main Category Bar Labels
By selecting this function, the system
shows the labels on the soft-keys of
the main category bar.
• Navigation Turn-by-Turn Displayed in
Cluster
By selecting this function, the next turn
direction will appear on the instrument
cluster along a programmed route until
the desired destination is reached (see
picture).
• Phone Pop-ups Displayed in Cluster
When this mode is selected a pop
up message will appear in case of
incoming call. Information associated
to call in progress are available by
entering to the “Audio” menu using the
buttons on the steering wheel RH side.
• Cluster Options
Selecting this mode allows you to
select which content to display in each
of the customisable areas in the upper
left and upper right on the display of
the instrument cluster: "Time", "Date",
"External Temperature", "Compass" or
"Empty".
It is also possible to select the Audio
info on Cluster between "Low",
"Medium" and "High" level.
Safety & Driving Assistant
Touch this soft-key to set the following
modes.
• Park Sense
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission is in R
(Reverse) mode and the vehicle speed
To Next Page
Loading...
